We do, however, recognize the danger of slacking off too much. Its very easy to loose momentum, and get behind on maintenance or loose focus and never finish what we started. As history would have it, we have both started ambitious projects in the past, only to never see them through to completion. That is not an option for us with these boats, but it is something we are both aware of.
One of my recent projects was the transom on Tara. There was nothing wrong with it in terms of rot or damage, it was just ugly. And the reason it was ugly was entirely my fault.
I've already written about Citrus Strip and how much I like it, but this was going to be a real good test for this miracle striper. I was about to take off six layers of Epifanes varnish.
I wasn't real impressed after the first application. Only some sections of the transom began to bubble up. I scraped those off, and applied more Citrus Strip.
The second application worked much better. Almost all of the varnish was bubbling up. I applied Citrus Strip to the stubborn areas and waited. This stuff works really fast.After ten minutes I was ready to scrape off the stripper.
Here again I have to say, I love this stuff. Notice the orange gloves that I'm not using? Don't need them! Other then a rather itchy smell, this stuff doesn't burn the skin like most other strippers.
After a few hours I was done with the stripping and sanding. There is no way I would be finished so quickly if it wasn't for the Citrus Strip.
Travis helped me stain and brush the first coat of very Epifanes. We thinned this first coat liberally to let it really soak into the wood.
I'm spraying the remaining coats, one every morning, or every other morning. The beauty of Epifanes is that it requires no sanding in between coats if reapplied within 72 hrs. This saves a lot of time, and energy, as does spraying. Previously it took me about 3 hrs to brush a coat on the transom, as opposed to fifteen minutes of spraying, and fifteen minutes of cleaning the gun. That's a huge difference! Plus, the compressor makes a lot of noise and creates a very festive atmosphere. I really do like using loud tools. Must be a girl thing.